You should consider your safety when working with or near electricity with the Industrial Steel Ladders you are using to avoid a bad accident. When working around electricity, it is vital to avoid using metal ladders. There are many types of ladders on the market today in a variety of materials. If you have never worked with electricity before, then this guidance on ladder safety will hopefully be helpful to you. If you haven't worked with electricity before, then you should choose a non-conductive material for the ladder.
1) What you need to know about ladder safety
In general, you should check a few safety measures before climbing any ladder, especially when working with electricity. As part of this, you should level and secure your footing, secure your ladder and lock the safety arms, and be aware of any overhead obstacles. You should also clear any debris above or around the ladder base below to make the work area safe. Both inside and outside connections are often made with step ladders when working with electricity.
2) Climbing limits need to be understood
It is important to be stable when using ladders, especially in more dangerous situations. You should never climb on the top or second to top step of a ladder. Balance will be affected and you will be at greater risk, but you should also be careful not to stand too low on the ladder and place yourself in a position where you need to stretch to complete the task.
If you are going to complete the task, it is advisable to get a taller ladder and to always play it safe. Working with electrical equipment often involves power tools, which increases the level of danger because if a drill bit sticks, for instance, and moves you around, you could fall off if you are not positioned correctly.
3) For the ladder base, make sure the ground is smooth and level
You may find yourself in more difficult or awkward areas for ladder placement when working with electricity. For your ladder, try to find a level surface, but if you must use dirt or gravel to level the surface, make sure it is fully compacted and solid. It may be necessary to use blocking material to level the ladder base on occasion. In this case, choose flat, solid boards or timbering that won't slide from the Industrial Extension Ladders base.
4) Find out what dangers are hidden around you
When climbing a ladder, you should be extra cautious of overhead hazards, such as bare wires or obstacles that you could bump your head against. Keep in mind that there may be overhead service lines or electrical lines in the area you are working in, so keep this in mind before climbing. Additionally, there may be pipes or other objects sticking out of the ground that you could trip over or fall onto if you fall off the ladder. If possible, move these hazards out of the way before you begin working.
5) The right ladder should be chosen
Both wood and fibreglass are non-conductive, so they make excellent materials for electrical work. The pros and cons of both materials must be considered when choosing one over the other. A non-conductive material like wood can rot over time when wet, so it's not ideal for outdoor conditions for an extended period of time. Fibreglass, on the other hand, is more expensive than wood and can withstand outdoor weather for a long time. You should decide which is best for you based on your needs.
The above tips should help you stay safe while working with electrical equipment. We hope that you have found them helpful. You can view our range of Trade Roof Ladders
on our website, which is ideal for DIY tasks as well as construction jobs. You are welcome to contact our team if you have any other questions or concerns.
Comments